MIL-STD-2071A(AS)
4. GENERAL REQUIREMENTS
4.1 General. The procedures described in this standard provide the information required to test airborne chaff payloads. The flight test, when conducted in accordance with the test procedures and test limits of this standard, will determine whether the chaff payload perform properly under normal flight operations and conditions, and conform to the specified performance requirements as delineated in the associated specification.
4.1.1 Associated specification and test plan. The procedures contained in this standard shall be supplemental to the performance requirements of the associated specification for the particular chaff payload, and by a detailed test plan prepared by the test activity.
4.2 Test plan. A test plan shall be prepared by the test activity to document information necessary to ensure standardized testing of a particular chaff payload. The information shall include, but not be limited to the following:
a. The type of aircraft, dispenser, and dispenser installation
b. The number of chaff samples to be measured and the number of aircraft passes (runs)
c. The rate at which chaff will be dispensed
d. The amount of chaff to be deployed on each run
e. The time after deployment at which measurements are to be made f. The duration of each measurement
g. How the RCS data shall be processed
h. The minimum RCS requirement for the chaff payload
i. The flight profile including altitude, aspect angle relative to the measurement site, and calibrated airspeed.
The test plan shall contain all information and requirements which are peculiar to the test facility. In addition, the plan shall include pre-and post-flight radar calibration procedures (see 6.2).
4.3 Test facilities, instrumentation, aircraft, and dispenser installation. The test facilities, instrumentation, aircraft, and dispenser installation used to conduct preproduction, initial production, and production chaff measurements shall provide and maintain the test conditions as specified in the associated specification, the test plan, and as specified in sections 4 and 5 of this
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business