MIL-STD-2071 Testing Of Chaff Radar Cross-SectionThis standard establishes the procedures, requirements, and instructions for testing chaff payloads under flight conditions to determine compliance with the associated system performance or detail specification specified in the contract.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35

MIL-STD-2071A(AS)

APPENDIX

4.4.3.1 Data formats. The formats for the data listed in 4.4.3a through c. above are shown in figures 4 through 6. In addition, the data may be processed in any or all of the other methods described in 4.4.2 of this appendix as required by the applicable associated specification of the chaff payload being tested.

4.4.3.2 Data retrieval. All processed data shall be coded for machine retrieval by any of the following parameters: type of aircraft, type of radar, type of chaff, manufacturer, test range, or date and type of test. Data retrieval codes are required.

4.4.3.2.1 Data retrieval codes. Data retrieval codes are provided or shall be generated so that archived data may be retrieved by the processing equipment operator when any combination of codes (radar, facility location, type of test, type of aircraft, type of chaff, chaff manufacturer, and date) are fed into the processor. Data retrieval codes shall be recorded prior to each flight test with the appropriate information as contained herein.

4.4.3.2.1.1 Retrieval codes. Retrieval codes shall include:

a. Radar codes

b. Location codes

c. Type of test codes d. Aircraft codes

e. Target codes

f. Manufacturer codes

5. DETAILED REQUIREMENTS

This section not applicable to this appendix.

6. NOTES

This section not applicable to this appendix.